Venus Stone Finish
DESCRIPTION: Stone Finish serves as both a penetrating seal that fills the pores to resist
chemical damage and stains and a finish that produces a lustrous shine that
standsup to heavy traffic. Applies easily with any conventional applicator.
Special leveling agents allow the protective film to form evenly and dry to a
full gloss. When repairs are necessary, Stone Sealer responds readily to
standard low speed or high-speed burnishers.
For use on Stone, Terrazzo, Quarry Tile, and Brick.
Non-Yellowing Easy to Apply and Maintain
DIRECTIONS: Strip existing seal and finish. Rinse thoroughly and allow to dry.
Apply Stone Sealer in a medium, uniform coat with a clean applicator or seal
mop.
Apply additional coats only when floor is completely dry. Usually 30-40
minutes, depending on humidity. For best results, three or four coats are
suggested to build gloss and provide maximum durability.
Slip resistance meets or exceeds CSMA and UL Standard. (ASTM-D-2047-69), 0.5
Minimum