Meteor Concrete Sealer (5 Gallon)
Concrete Sealer is a premium coating for concrete surfaces. This water based
sealer can be used for interior and exterior applications where demands for
excellent adhesion, chemical resistance, and wear are required. Fast drying
with no solvent fumes make Meteor ideal for closed in areas. Meteor has low
sensitivity to Amine - containing Strippers. Concrete Sealer can be used as a
membrane curing compound when applied at 200 ft2/gal.
Water Resistant
Brightens Stone Work
Non-Yellowing
DIRECTIONS
Curing and Sealing New Concrete: Allow Concrete to dry and harden until safe
for traffic. Sweep up loose dirt or dust. No need to neutralize. Apply liberal
coat using garden type sprayer, mop or squeegee, roller, or lambs wool
applicator. If higher gloss is desired, allow 1st coat to dry 45 minutes and
apply 2nd coat.
Sealing Old Unsealed Concrete: Remove all grease, oil and dirt using a heavy
duty cleaner and scrub brush. Rinse floor thoroughly. Apply liberal coat using
garden type sprayer, mop, or squeegee, roller, or lambs wool applicator. If
higher gloss is desired, allow 1st coat to dry 45 minutes and apply 2nd coat.
Surface temperature should be above 40F. Allow final coat to dry
at least 12 hours before allowing heavy traffic onto floor.